Ceramic ball valves in water treatment applications

Compared to solenoid valves, ceramic ball valves provide improved longevity and wear resistance, and decrease prices. According to Anelia Hough, water treatment consultant at Allmech, a number one South African producer of boilers and supplier of water remedy elements, they’re ideal for water-saving techniques, industrial automatic control methods, automatic sewage methods, environmental safety initiatives, water provide and drainage, meals and water treatment, and irrigation systems.
Hough says that the proprietary 3-way Runxin valves that Allmech shares have confirmed especially helpful in water therapy applications.
“Recently, considered one of our customers put in a filtration plant to treat surface water coming from a close-by river,” she says. “Water turbidity was the primary challenge. Due to the standard of incoming water, the backwash cycle needed cleaned, filtered water. The goal on this application was to make sure the filter media beds had been totally cleaned throughout backwash cycles. During a backwash, the media should be adequately raised and combined to get rid of contaminants. We put in a single L-shaped 3-way ceramic valve as a substitute of two solenoid valves, switching or diverting the flow path of the incoming water between raw river water and filtered water. When multiple units need clear water diverted, there’s an exponential saving.”
In เกจวัดแรงดันไอน้ำ , the 3-way valve allowed raw water from the river to be handled, but as quickly as the management valve place was modified again to begin the backwash, the 3-way valve modified position to allow clean water for backwash cycle to enter the valve.
READ: Smart water meters remain a sustainable answer to the global water crisis
Another Allmech customer operates a dairy manufacturing facility that operates 24/7. Part of the company’s operation is its boiler, which provides steam into the power. A duplex water softener was installed with two softener management valves.
“The Runxin F74 softener control valves have a function to interlock valves in parallel system to have one valve in regeneration, however the different valve is in service,” says Hough. “Allmech put in a 3-way valve to alter the water move from standby unit to the service unit within seconds. The goal in this software was to make sure soft water can be provided 24/7 to the boiler. Because the system ensured that one valve was regenerating while the other was in service, the customer solely required one brine tank, which resulted in further price savings.”
Runxin’s ceramic ball valves provides several design features to enhance efficiency in comparability with ball valves made from traditional supplies, the largest of which is the longevity of the parts. The valves are hermetically-sealed, so that they have extraordinarily high resistance to corrosion, abrasion, and chemical compounds, to face as a lot as the hardest water treatment challenges. The ball cores and seats are exactly floor in pair to ensure zero leakage. Each of the plastic options comes with a alternative of connection between metric feminine thread and uPVC Glue and a variety of the valves can be found in several grades of metal.
Share

Leave a Comment